Проблема с Sims 5.4 CSD Опции

[yuoras]

Вот иногда встречаю такую ситуацию :
Есть в дозвоне через модем GSM 5 номеров , вот доходит до определённого номера и всё , дальше не переходит на следующий номер.
Вот лог
24/01/14 08:17:06.468 TimeBegin 08:18
24/01/14 08:17:06.468 SessionQuota 12
24/01/14 08:17:06.468 TotalQuota 60
24/01/14 08:37:07.531 'AT &D2 &C1 &S0' - OK
24/01/14 08:37:07.671 'AT+CMEE=1; +CR=0; +CRC=1' - OK
24/01/14 08:37:07.796 'AT\N0' - OK
24/01/14 08:37:07.953 'AT+CBST=7,0,1' - OK
24/01/14 08:37:08.078 'AT+CMGF=0' - OK
24/01/14 08:37:09.203 'AT+CNMI=2,0,0,0,1' - OK
24/01/14 08:37:09.796 *** Outgoing connection ***
24/01/14 08:37:09.796 ATD050*****
24/01/14 08:37:29.093 ATD050***** answer = CONNECT 9600
24/01/14 08:37:29.093 We are connected...
24/01/14 08:37:29.312 -> Outgoing connection established
24/01/14 08:37:29.421 0 <- Handshake
24/01/14 08:37:29.421 N=0,F=0,B=0 l=4 t=0
24/01/14 08:37:29.421 HostMAC=0xFFFFFF00, TelSMS=
24/01/14 08:37:29.421 0 Ack ->
24/01/14 08:37:29.828 -> Nf=0,CTS=1,Rpt=0 l=6 t=2
24/01/14 08:37:29.828 Remote MAC=12CF9F, Ver=1, MaxLen=176
24/01/14 08:37:29.828 0 <- Synchronization
24/01/14 08:37:29.828 RemoteMacAddr=0012CF9F
24/01/14 08:37:44.656 rl_GetDataFor(Ack=0, res=0)
24/01/14 08:37:44.656 <- Nf=1,CTS=0 l=0 t=1
24/01/14 08:37:45.875 -> Nf=1,CTS=1,Rpt=0 l=0 t=4
24/01/14 08:37:45.875 -> AL
24/01/14 08:37:46.671 GetDataFor in
24/01/14 08:37:46.671 rl_GetDataFor(Ack=0, res=0)
24/01/14 08:37:47.406 -> Nf=1,CTS=1,Rpt=0 l=0 t=4
24/01/14 08:37:47.406 -> AL
24/01/14 08:37:48.671 GetDataFor in
24/01/14 08:37:48.671 rl_GetDataFor(Ack=0, res=0)
24/01/14 08:37:48.906 -> Nf=1,CTS=1,Rpt=0 l=0 t=4
24/01/14 08:37:48.906 -> AL
24/01/14 08:37:50.437 -> Nf=1,CTS=1,Rpt=0 l=0 t=4
24/01/14 08:37:50.437 -> AL
24/01/14 08:37:50.687 GetDataFor in
24/01/14 08:37:50.687 rl_GetDataFor(Ack=0, res=0)
24/01/14 08:37:51.921 -> Nf=1,CTS=1,Rpt=0 l=0 t=4
24/01/14 08:37:51.921 -> AL
24/01/14 08:37:52.703 GetDataFor in
24/01/14 08:37:52.703 rl_GetDataFor(Ack=0, res=0)
24/01/14 08:37:53.421 -> Nf=1,CTS=1,Rpt=0 l=0 t=4
24/01/14 08:37:53.421 -> AL
24/01/14 08:37:54.703 GetDataFor in
24/01/14 08:37:54.703 rl_GetDataFor(Ack=0, res=0)
24/01/14 08:37:54.953 -> Nf=1,CTS=1,Rpt=0 l=0 t=6
24/01/14 08:37:54.953 -> DC
24/01/14 08:37:54.953 *** Disconnection ***
24/01/14 08:37:56.703 Finished

24/01/14 08:38:00.078 Error sending command '+++'. Error code = C00005B4
24/01/14 08:38:01.703 'ATH0' - OK


И всё , дальше не перебрасывает на следующий номер.
Кто сталкивался, как боритесь?

Сообщение отредактировал yuoras - 25.1.2014, 15:13